Doodohdaw OS by OscillatorSynk

Oscillator 1 timbre

Both sawtooth and square oscillators are enabled.

Pulse width of square oscillator is manually set to 81% (50% is perfectly square, 100% is very short pulsewave).

Oscillator 2 timbre

Volume level for oscillator 2 is manually set to 145.

Tone for oscillator 2 is set to 65 and is modulated by Mod Wheel.

Mod Wheel mod-matrix 2 modulation amount for tone for oscillator 2 is -40.

Volume (VCA) volume

Amplification level is set to 6dB (255) and is modulated by VCA Env.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is manually set to 41.

Noise timbre

Noise level is manually set to 82.

OSC 1→2 sync timbre

to be completed

Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 50Hz (0) and is modulated by Mod Wheel, Note Vel, VCF Env.

VCF Env direct modulation amount for low-pass filter cut-off frequency is 255.

Low-pass filter envelope amount is modulated by Note Vel, Mod Wheel, Note Num.

Note Vel direct modulation amount for low-pass filter envelope amount is 128.

Mod Wheel mod-matrix 3 modulation amount for low-pass filter envelope amount is -9.

Note Num direct modulation amount for low-pass filter envelope amount is 232.

Filter resonance is set to 38 and is modulated by Mod Wheel.

Mod Wheel mod-matrix 4 modulation amount for filter resonance is 16.

Oscillator drift & unison detuning timbre

Unison detune level is manually set to ±35 cents (180).

Oscillators drift level is manually set to 40. Drift rate is 0

Oscillator 2 pitch pitch

Oscillator 2 pitch is set to 0 semitones and is modulated by Mod Wheel.

Mod Wheel mod-matrix 1 modulation amount for oscillator 2 pitch is 20.


Mod Wheel modulator

Controls OSC 2 Pitch, OSC 2 Tone Modulation Depth, VCF Envelope, VCF Cut-off Frequency, VCF Resonance.

functiontypedestinationamount
pitch matrix OSC 2 Pitch 20
timbre matrix OSC 2 Tone Modulation Depth -40
timbre matrix VCF Envelope -9
timbre fader-indirect VCF Cut-off Frequency 255
timbre matrix VCF Resonance 16

Note Num modulator

Controls VCF Keyboard Tracking.

functiontypedestinationamount
timbre fader VCF Keyboard Tracking 232

Note Vel modulator

Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.

functiontypedestinationamount
timbre fader-indirect VCF Cut-off Frequency 255
menu VCF Envelope Velocity Sensitivity 128
menu VCA Envelope Velocity Sensitivity 128

VCA Env modulator

Controls VCA Gain for All Voices.

functiontypedestinationamount
volume menu VCA Gain for All Voices 255
namevalue
VCA Envelope Attack Time 0.21s (36)
VCA Envelope Decay Time 0.39s (67)
VCA Envelope Sustain Level 0% (0)
VCA Envelope Release Time 0.68s (97)
VCA Envelope Trigger Mode Key (0)
VCA Envelope Attack Curve 0
VCA Envelope Decay Curve 0
VCA Envelope Sustain Curve 128
VCA Envelope Attack Curve 0

VCF Env modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader VCF Cut-off Frequency 255
namevalue
VCF Envelope Attack Time 0s (0)
VCF Envelope Decay Time 0.85s (109)
VCF Envelope Sustain Level 0% (0)
VCF Envelope Release Time 0.57s (90)
VCF Envelope Trigger Mode Key (0)
VCF Envelope Attack Curve 255
VCF Envelope Decay Curve 0
VCF Envelope Sustain Curve 128
VCF Envelope Attack Curve 0